All Clear

1. Surface must be free from dust, loose particles and soap residue. If required, clean with turps. Porous surfaces must be dry.
2. Cut cartridge, fit nozzle and cut to size. Insert the cartridge into a caulking gun.
3. Apply with caulking gun, forcing product into gap. Press into cracks or surface by pushing sealant ahead of nozzle.
4. Smooth sealant surface immediately with tool dipped in turps.

Limitations:

• May damage some plastics e.g. polystyrene and polycarbonate.
• Not for permanent water immersion e.g fish tanks
• Not suitable for use over silicones
• Not suitable for polystyrene foam

• *Wet Surfaces: Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
• Skins immediately, maximum toughness achieved over several days.
• Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
• Store in cool dry conditions, below 30°C

• Uncured product may be removed with mineral turps.
• Cured product can be removed by cutting and scraping.