Selleys All Fix Multi Grip

Use in well ventilated areas.

1. Ensure surfaces are clean and dry. Remove cap and carefully pierce foil seal with sharp object. Replace nozzle part of cap.
2. Squeezing gently, apply an even coating of Selleys All Fix to both surfaces to be joined. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. Instant bonds can be achieved on contact by waiting approximately 1 minute before pressing parts together firmly.
3. Allow approximately 10-12 hours drying to achieve strength sufficient for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or nonporous materials (e.g. PVC) are being bonded.
4. After application, clean nozzle and replace cap. Any spills can be removed with acetone (found in some nail polish removers).

Limitations:

• Not suitable for polystyrene foam. Use All Fix Big Jobs.
• *Not suitable for polyethylene and polypropylene. Use Selleys All Plastic Fix.
• Not for bonding requiring heat resistance above 90°C. Use Selleys Power Grip

• For very porous surfaces – apply a thin coat to both surfaces and allow to dry (approximately 5 minutes). Apply another layer as per normal directions.

• Uncured product may be removed with Acetone.
• Cured product can be removed by scraping.